Products

The Titus Company is proud to represent the very finest manufacturers in the compressed air and gas industry. We are dedicated to providing the most reliable and dependable equipment available and will only add new products or technologies that meet our exacting standards. To see a comprehensive listing of the specific products that we carry, select a category below.

Compressors Dryers - Refrigerated Dryers – Desiccant Dryers - Membrane Dryers – Specialty Breathing Air Systems Nitrogen Generators

Filters Oil/Water Separators Nitrogen Generators Air Gas Receivers Drains Energy Controls Modular Piping

Tank Vent Dri- Breathers Flame Arrestors Fluid Chillers Air Fluid Coolers Heat Exchangers Pumping Stations Pumps

Compressors
Products		Benefits
Boge Sullivan / Palatek Saylor Beall		The Titus Company offers a complete line of compressors including Reciprocating ranging from 1.5 HP to 30 HP and Rotary Screw ranging from 4 HP to 450 HP. From full-featured Boge contact cooled and oil free models to readily customizable Sullivan / Palatek units, we can fit any application with the most cost-effective and efficient configuration available in the marketplace. Optional features include Variable Speed Drives, High Pressure, Heat Recovery Systems and a variety of other specialty designs to meet unique customer requirements.

Back to Top

Dryers - Refrigerated
Products		Benefits
ZEKS Premier		Our comprehensive offering of refrigerated dryers includes Non-Cycling & energy-saving Cycling Dryers from 5 to 20,000 SCFM, High Temperature & High Pressure Dryers, Gas Coolers and Stainless Steel Dryers. We have specifically chosen our suppliers and product range to provide high quality solutions that satisfy any application and any budget.

Back to Top

Dryers - Desiccant
Products		Benefits
Kemp ZEKS		The Titus Company’s history is grounded in desiccant dryer technology, and today it can boast the most knowledgeable staff and highest quality products in the marketplace. Our product group includes Heatless, Internally & Externally Heat Reactivated and Blower Purge Dryers with a wide range of available options including Moisture Load Control & Dewpoint Monitoring.

Back to Top

Dryers - Membrane
Products		Benefits
Air Products and Chemicals, Inc.		When membrane dryers were first introduced in the 1980s, The Titus Company was one of the few believers in this unique drying technology. Today, the uses and applications for them are exploding. Available in capacities ranging from 0 to 1000 SCFM and dewpoints from - 40ºF to +40ºF, this innovative dryer has no moving parts and will last indefinitely with proper filtration.

Back to Top

Dryers - Specialty
Products		Benefits
Kemp		If it needs drying, The Titus Company probably offers equipment to do so. We offer systems capable of drying exotic gases including Natural Gas, Hydrogen, Argon, Nitrogen and Carbon Dioxide and liquids that include Alcohols, Liquefied Natural Gas, Olefin Liquids and Solvents. These systems can be designed and configured to meet even the most demanding applications.

Back to Top

Breathing Air Systems
Products		Benefits
Domnick Hunter		Our high quality line of breathing air systems converts normal compressed air into Grade D breathing air in capacities from 13 to 675 SCFM. These systems are available in several configurations to precisely meet application requirements. A wide range of options are available including carbon monoxide monitors and portable configurations for ease of transport.

Back to Top

Nitrogen Generators
Products		Benefits
TN2 Air Products and Chemicals, Inc.		Utilizing the state-of- the-art PRISM® Membranes from Air Products and Chemicals, The Titus Company offers a complete range of Nitrogen generation products. These nitrogen generators are successfully meeting the needs of a wide range of applications that include Chemical & Petrochemical, Pharmaceutical, Electronics, Laboratory Sciences, Metal Processing, Cutting & Fabrication and Food & Beverage Processing and Packaging.

Back to Top

Filters
Products		Benefits
Titus Filters Nafco ZEKS		Filters tend to be the most under-appreciated components of an air or gas system, but we know that they can significantly impact a system’s performance and success. As a result, we offer a wide range of filters to ensure that we always have the right tool for the job. Our lines include high efficiency particulate, coalescing & vapor removal filters, mist eliminators and sterile filters.

Back to Top

Oil/Water Separators
Products		Benefits
Boge Sullivan / Palatek		The EPA has mandated that no compressed air or gas condensate that contains a high oil concentration may be emptied into a drainage system. This necessitates the addition of an Oil / Water Separator. Our experience has shown that different systems and different oils require different solutions, and our product offering has been selected to handle even the most troublesome oil separation needs.

Back to Top

Air/Moisture Separation
Products		Benefits
Boge Sullivan / Palatek		The road to high quality compressed air or gas begins with the simplest of technologies. We offer both air and water- cooled aftercoolers along with high efficiency separators to remove the bulk oil and water contamination present in most compressed air and gas systems.

Back to Top

Air & Gas Receivers
Products		Benefits
Penway Steel Fab		We offer a complete line of horizontal and vertical air and gas receivers ranging in size from 12 to 7,500 gallons with pressure capacities up to 300 PSIG. Specialty receivers are available to meet higher pressure or size requirements.

Back to Top

Drains
Products		Benefits
Drain-All Air System Products		A lot of good work that is done in aftercoolers, separators, filters and refrigerated dryers can be undone by poorly performing condensate drains. Recognizing this, The Titus Company has opted for those products that stand up to the rigors of customer applications. Our line includes cost- effective float drains, electronic-Timed solenoid & ball valve drains and state-of-the-art no-air-loss drains.

Back to Top

Energy Controls
Products		Benefits
The Titus Company ZEKS		Understanding that many compressed air & gas systems operate inefficiently. The Titus Company has augmented our standard product lines with controls and instrumentation that oftentimes allow us to reduce the amount of horsepower required to satisfy customer flow and pressure requirements. These controls coupled with smart system design can significantly reduce your cost of operation.

Back to Top

Modular Piping
Products		Benefits
Teseo		Pressure drop, corrosion, leak losses and inefficiency plague conventional air and gas distribution systems. Eliminate these problems with a state-of-the-art modular, aluminum piping system from The Titus Company. The Teseo line of aluminum piping and accessories provides and efficient system that also allows for easy modifications, so that system downtime is kept to a minimum.

Back to Top

Monitoring Equipment
Products		Benefits
The Titus Company Various		No matter what parameter you want measured, The Titus Company probably has a monitor to do the job. We use only top manufacturers to provide monitoring equipment for dewpoint, pressure, temperature, flow, oxygen, carbon monoxide, and many others. Monitoring equipment can be equipped to include communication and local or remote alarm capabilities.

Back to Top

Tank Vent Dri- Breathers
Products		Benefits
Kemp		Any storage tank that is housing a material or liquid that can be damaged by moisture contamination or could cause damage to the tank by reacting with moisture should be protected using a Tank Vent Dri-Breather from The Titus Company. Dri-Breathers with water-holding capacity from 1 to 26 lbs. are available. Dri-Breather Reactivators are also available.

Back to Top

Flame Arrestors
Products		Benefits
Kemp		Explosion prevention and containment are prime considerations in all combustible mixture processing or vent line applications. The Titus Company offers a full line of flame arrestors for Class C & D gases and Class B gases including Hydrogen. These field- proven arrestors represent the best available technology available today and offer maximum protection at minimum cost.

Back to Top

Fluid Chillers
Products		Benefits
General Air Products		A complete line of chillers including water-cooled and air-cooled are available through The Titus Company for applications including HVAC, plastics manufacturing, laser cutting, welding, wine & beverage, process cooling, MRI scanning equipment cooling, lube oil cooling and many others. ½ ton to 500 ton systems are available with energy saving units available in ½ to 40 ton sizes.

Back to Top

Air Fluid Coolers
Products		Benefits
General Air Products		When needing a liquid cooling source for equipment such as air compressors, hydraulic presses, welding machines and furnaces, contact The Titus Company regarding our line of closed-loop Air Fluid Coolers. The closed-loop design means that equipment is kept free of sludge, lime and other open system contaminants.

Back to Top

Heat Exchangers
Products		Benefits
General Air Products		A full line of heat exchangers is available to you through The Titus Company. From shell and tube to plate frame designs we can provide heat exchangers for air, oil, water, and most other liquid and gas streams. Whatever the heat exchange application, we probably have a solution that fits.

Back to Top

Pumping Stations
Products		Benefits
General Air Products		Available in single or duplex pump configurations, these fluid pumping systems come pre-wired and pre-assembled on a common base for ease of positioning, installation and start-up. Custom units that come equipped with evaporative coolers, storage tanks and heat exchangers are available.

Back to Top

Pumps
Products		Benefits
Ebara		The Titus Company offers a complete line of small, medium & large submersible, end suction and multistage pumps for water, wastewater and other non-hazardous fluids. Contact us for complete sizing and selection assistance for all of your fluid transport applications.